Seat heating 1. Seat temperature Press seat heater button to activate. 2. Temperature adjustment Press seat heater button again to adjust temperature until desired setting. There are 4 temperature levels. Temperature:OFF 35˚C 37˚C 39˚C Note:It will take a few minutes to heat the seat. The setting of desired temperature will be saved and locked in memory. User setting The user setting function allows the storage of six user profiles in the quick access memory. 1. Select function setting With the seat occupaid adjust the cleaning function settings at your desired level. -Water pressure -Water temperature -Nozzle position -Massage (Oscillating/ Pulsating clean) -Dryer temperature Those settings are temporally stored in memory. 2. Select user setting Press user button for 3 seconds, and the display will start blinking. You can save those temporally stored settings at the appointed user number. Repeatedly press user button to select desired user. 3. Confirm Press stop to confirm the setting. Product setting adjustment Light The LED light installed at the rim of the toilet will activate at the established time, so that the user may find the toilet at night. Light Press light button to activate and deactivate light function manually. Auto light 1. Auto light Press light button for 3 seconds to switch between (auto light) and (auto light off) Auto light ON Auto light OFF 2. Adjustment time With mode selected, press or button for time adjustment. 3. Confirm Press stop to confirm the setting or wait 5 seconds. Setting time Example: Select 8h starting at 22:00pm. The night light will activate ON daily from 22:00pm to 6:00am. Time OFF 9 English