C4 Grifería electrónica · Instalación | 643 M3-E Instalación 2.7. AJUSTE DE LA DISTANCIA DE DETECCIÓN DETECTION DISTANCE ADJUSTMENT El grifo viene preajustado de fábrica. Esta distancia puede variarse en función de los requerimien- tos de instalación. The faucet is preadjusted from factory. The detection distance can be adjusted depending on the requirements of installation. 1 5s. 2 < 5 cm 5s. D 3 Min: 4 cm D Max: 16 cm ES 1Desconectar y conectar la alimentación elétrica. 2 Antes de 5 segundos (mientras el LED rojo parpadea) colocar las manos a menos de 5 cm. del LED. 3 Cuando el LED quede con luz fija mover la mano a las distancia de detección deseada (entre 4 y 16 cm.) Cuando se apague el LED el grifo queda ajustado a la distancia seleccionada. ATENCIÓN: dependiendo del lugar de emplazamiento del grifo, es posible observar deteccio- nes involuntarias. Si esto ocurriera, reducir la distancia de detección. EN 1Unplug and re-plug power supply. 2 Within 5 seconds (while red LED blinks) place the hands closer than 5 cm. in front of LED. 3 When the LED stops blinking, move the hands to the desired distance of detection (between 4 and 16 cm). When the LED shuts off, the tap is adjusted to the desired detection distance. WARNING: depending on the placement of the faucet, it is possible to experience involuntary detections. If that happens, reduce the detection distance.