thinbigtechnical information® A-L' A'/B' Marengo Downtown Gris ≤ 0,5% > 35 N/mm² >700 N Accomplish 5 ULA UA Accomplish Accomplish R9 Class 1 5 V-3 Blanco Stone Beizge ≤ 0,5% > 35 N/mm² >700 N Accomplish 5 ULA UA Accomplish Accomplish R9 Class 1 4 V-3 Negro Calacatta Natural ≤ 0,5% > 35 N/mm² >700 N Accomplish 5 ULA UA Accomplish Accomplish R9 Class 1 4 V-3 blanco Calacatta Pulido ≤ 0,5% > 35 N/mm² >700 N Accomplish 5 ULA UA Accomplish Accomplish Class 1 3 V-3 blanco Pure White ≤ 0,5% > 35 N/mm² >700 N Accomplish 5 ULA UA Accomplish Accomplish R9 Class 0 4 V-1 Pure White ≤ 0,5% > 35 N/mm² >700 N Accomplish 5 ULA UA Accomplish Accomplish Class 0 3 V-3 pulido Textil Blanco ≤ 0,5% > 35 N/mm² >700 N Accomplish 5 ULA UA Accomplish Accomplish R9 Class 1 4 V-3 Gris Packing thinbig® Box Pallet Description Format Manufacturing Thickness Pieces Kg Boxes Kg format m² m² 120 × 120 1200 × 1200 5,6 2 44,00 2,88 25 1.100,00 72,00 thinbig Downtown® 120 × 240 1200 × 2400 5,6 13 631,15 37,44 1 631,15 37,44 120 × 120 1200 × 1800 5,6 2 44,00 2,88 25 1.100,00 72,00 thinbig Stone® 120 × 240 1200 × 2400 5,6 13 631,15 37,44 1 631,15 37,44 120 × 120 1197 × 1197 6 2 44,26 2,88 23 1.017,98 66,24 thinbig Calacatta® 120 × 240 1197 × 2397 6 20 941,00 57,60 1 941,00 57,60 120 × 120 1200 × 1200 5,6 2 44,00 2,88 25 1.100,00 72,00 thinbig Pure® 120 × 240 1200 ×2400 5,6 13 631,15 37,44 1 631,15 37,44 120 × 120 1197 × 1197 6 2 44,26 2,88 23 1.017,98 66,24 thinbig Textil® 120 × 240 1197 × 2397 6 20 941,00 57,60 1 941,00 57,60 Special pieces Step 30 × 120 2 13,60 0,72 22 299,20 15,84 Skirting 9,5 × 120 13 21,45 1,48 42 900,90 62,24 Mesh 30 × 30 10 13,00 0,90 60 780,00 54,00 Handling 2. The handling of the plate will always be carried 3. Rest the thinbig piece on the long side and® out with the boxes close to the surface to be place it always on soft material (polystyrene, 1. We recommend the use of a fork-lift to move covered, with the help of someone else (never rubber, wood…) with enough separation. Place it and lift the boxes with thinbig product, taking® alone), holding the upper section and keeping it against the wall at an approximate angle of 30°. the centred boxes from the long end. If the box straight, with the corners well protected against is taken from the short end we recommend the accidental impacts. If this is not done properly, 4. To store it horizontally, rest the piece on the use of 2.5-metre long forks and if it is taken cracks might appear in the piece, which will worktop avoiding its bending. It is very important from the long end, then the fork should be at later originate breakages. to ensure that the surface is clean and that it is least 1.2 metres long. even; otherwise it might cause the breakage of A more robust option to handle the piece ma- pieces when cutting or drilling. To prevent the box from bending, causing the nually can be achieved with double suction breaking of the product, the forks should be clamps placed on a frame (this equipment may Always wear protective anti-slip gloves when separated to the maximum. be purchased in points of sale specialising in handling the pieces manually, as well as safety building materials). The fl exion of the pieces is footwear. achieved with this tool. CollectionReferenceUNE-ENISO 10545-3UNE-ENISO 10545-U4N E-ENISO 105U4N5E--4E NISO10545-9UNE-ENISO 10545-14UNE-EN ISO 10545-1U4NE-ENISO 10545-6UNE-ENISO 10545-12NORMA DIN U5N1 E1-3E0NV 12E6N3-130/21003 CTDA