10 Maintenance procedure - Type 2 fittings 1. Turn off water supply. 2. Remove lid. 3. Expose the diaphragm washer by twisting the valve until a sharp click then pull upwards. 4 . Check the diaphragm seal is clean and no dirt is sitting on the face A. 5 4 3 5 . I f necessary remove diaphragm and turn 2 1 over to provide clean seal face. 6. Replace the valve by pushing down and twisting the valve until it clicks. 7. Refer to assembly instructions for correct orientation and replace lid. 8. Check the push button orientation is correct. The full flush button should be in contact with the full flush paddle (grey paddle). FLUSH OPERATION FULL SHORT FLUSH FLUSH FaceA FULL SHORT FLUSH FLUSH Grey Paddle Blue Paddle Product and spare parts information can be found on the Roca website at www.uk.roca.com