thinbigtechnical information® Marengo Downtown Gris ≤ 0,5% > 35 N/mm² >700 N Accomplish 5 ULA UA Accomplish Accomplish R9 Class 1 5 V-3 Blanco Stone Beizge ≤ 0,5% > 35 N/mm² >700 N Accomplish 5 ULA UA Accomplish Accomplish R9 Class 1 4 V-3 Negro Calacatta Natural ≤ 0,5% > 35 N/mm² >700 N Accomplish 5 ULA UA Accomplish Accomplish R9 Class 1 4 V-3 blanco Calacatta Pulido ≤ 0,5% > 35 N/mm² >700 N Accomplish 5 ULA UA Accomplish Accomplish Class 1 3 V-3 blanco Pure White ≤ 0,5% > 35 N/mm² >700 N Accomplish 5 ULA UA Accomplish Accomplish R9 Class 0 4 V-1 Pure White ≤ 0,5% > 35 N/mm² >700 N Accomplish 5 ULA UA Accomplish Accomplish Class 0 3 V-3 pulido Textil Blanco ≤ 0,5% > 35 N/mm² >700 N Accomplish 5 ULA UA Accomplish Accomplish R9 Class 1 4 V-3 Gris Packing thinbig® Box Pallet Format Manufacturing Description cm format Thickness Pieces Kg m² Boxes Kg m² mm 120 × 120 1200 × 1200 5,6 2 44,00 2,88 25 1.100,00 72,00 thinbig Downtown® 120 × 240 1200 × 2400 5,6 13 631,15 37,44 1 631,15 37,44 120 × 120 1200 × 1800 5,6 2 44,00 2,88 25 1.100,00 72,00 thinbig Stone® 120 × 240 1200 × 2400 5,6 13 631,15 37,44 1 631,15 37,44 120 × 120 1197 × 1197 6,0 2 44,26 2,88 23 1.017,98 66,24 thinbig Calacatta® 120 × 240 1197 × 2397 6,0 20 941,00 57,60 1 941,00 57,60 120 × 120 1200 × 1200 5,6 2 44,00 2,88 25 1.100,00 72,00 thinbig Pure® 120 × 240 1200 ×2400 5,6 13 631,15 37,44 1 631,15 37,44 120 × 120 1197 × 1197 6,0 2 44,26 2,88 23 1.017,98 66,24 thinbig Textil® 120 × 240 1197 × 2397 6,0 20 941,00 57,60 1 941,00 57,60 Special pieces Step 30 × 120 2 14,966 0,72 22 329,252 15,84 Skirting 9,5 × 120 13 22,269 1,482 42 935,298 62,24 Mesh 30 × 30 10 13,650 0,90 60 819,000 54,00 Handling 2. The handling of the plate will always be carriedout with the boxes close to the surface to be3. Rest the thinbig piece on the long side andplace it always on soft material (polystyrene,® 1. We recommend the use of a fork-lift to move covered, with the help of someone else (never rubber, wood…) with enough separation. Place it and lift the boxes with thinbig product, taking® alone), holding the upper section and keeping it against the wall at an approximate angle of 30°. the centred boxes from the long end. If the box straight, with the corners well protected against is taken from the short end we recommend the accidental impacts. If this is not done properly, 4. To store it horizontally, rest the piece on the use of 2.5-metre long forks and if it is taken cracks might appear in the piece, which will worktop avoiding its bending. It is very important from the long end, then the fork should be at later originate breakages. to ensure that the surface is clean and that it is least 1.2 metres long. even; otherwise it might cause the breakage of A more robust option to handle the piece manu- pieces when cutting or drilling. To prevent the box from bending, causing the ally can be achieved with double suction clamps breaking of the product, the forks should be placed on a frame (this equipment may be pur- Always wear protective anti-slip gloves when separated to the maximum. chased in points of sale specialising in building handling the pieces manually, as well as safety materials). The flexion of the pieces is achieved footwear. with this tool. ColecciónReferenciaWaUteNrE a-bEsNo rISptOio 1n0 545-B3enUdNinEg-E sNt rIeSnOgt1h054B5r-eU4aN kEin-gENst IrSenOg 1Tth0h5eU4rNm5E-a-4lE sNh oIScOk r1e0s5is4t5aS-n9tcaUeinN rEe-sEiNs taISnOc e105R45eUs-1iNs4tEa-nEcNe ItSoO ac1i0d5s4 a5n-d1 4RbeaUssiNsestEa-nEcNe IdSeOe p1 0a5b4ra5s-i6oDnuIrSaObi l1it0y5U4N5E-1-E2NR amNOpRMA DIN 5P1 e1nU3dN0uElu -EmNV 126H3a3rEdN/2n-e10s00s13ShaCdTeD vAariation