Type 2, 3 and 4 Fittings 13 Maintenance Procedure - Outlet Valve 1.Turn off water supply. 2.Remove lid. 3.Expose the diaghram washer by twisting the drop valve until a sharp click then pull upwards. 5 4 4.Check the diaghram seal is clean and no dirt is sitting on 32 1 the face A. 5.I f necessary remove diaghram and turn over to provide clean seal face. 5 3 2 1 6.Replace the valve by pushing down until it clicks. 7.Refer to assembly for correct orientation and replace lid. 8.Check the push button orientation is correct. The full flush button should be in contact with the full flush paddle (grey paddle). I FLUSH OPERATION F L FULL SHORT FaceA FLUSH FLUSH LL FLUULL SHORTS FLUSH FLUSH Grey Paddle Blue Paddle Product and spare parts information can be found on the Roca website at www.uk.roca.com