6 Acrylic Products Including baths, shower trays, plastic seats and plastic bath panels Do Don’t 3 Clean immediately after use to to stop the 7 Do not use household chemicals or build up of dirt and limescale. abrasive products such as hair dye, nail 3 Use warm soapy water or mild detergent varnish remover, paint strippers, strong disinfectants, aftershave and household and rinse down with cold water, wiping bleach. down with any soft dry cloth. 3 The occasional use of limescale removers 7 Do not allow soaps, shampoos etc to pool for any length of time as some may is acceptable following manufacturers permanently discolour the acrylic. instructions rinsing off with cold water immediately after use. 7 Do not have lit cigarettes or candle flames 3 Use T-Cut and a soft cloth to fix minor near acrylic as it can burn and melt. surface marks (acrylic baths only) Cast-Iron and Steel Baths Do Don’t 3 Clean immediately after use to stop the 7 Do not use bleach or abrasive products build up of dirt and limescale. when cleaning. 3 Use warm soapy water or mild detergent 7 Do not use bathroom limescale remover, followed by rinsing and if desired drying mousse or any acidic or alkali cleaner, unless with a soft dry cloth and this will be it has been specifically recommended in the sufficient. manufacturers instructions as suitable for 3 Use a steel bath repair kit should these type of products. any damage be caused to the bath. 7 Do not use steel wool or steel soap pads as Contact Roca for details. these can leave rust spots. 3 The use of cream cleaner can be used if there is a build up of limescale. For Customer Service and Aftersales assistance, please contact Roca Head Office on 01530 830080