286 | C1 Faucet collections ยท Installation M2-E Installation, use and maintenance 2.4. DETECTION DISTANCE ADJUSTMENT The faucet is preadjusted from factory. The detection distance can be adjusted depending on the requirements of installation. 1 5s. 2 < 5 cm 5s. D 3 Min: 5 cm D Max: 11 cm 1 Unplug and re-plug power supply. 2 Within 5 seconds (while red LED blinks) place the hands closer than 5 cm. in front of LED. 3 When the LED stops blinking, move the hands to the desired distance of detection (between 5 and 11 cm). When the LED shuts off, the tap is adjusted to the desired detection distance. WARNIN G: depending on the placement of the faucet, it is possible to experience involuntary detections. If that happens, reduce the detection distance. * Distances set with a Kodak gray scale card. (Distances set with hand may vary).