818 | C6 Electronic flush valves · Installation Sentronic-R Installation, use and maintenance Model A5A9702... A5A9802... Power 4 x LR6/ 1.5V/AA alkaline batteries AC100-240V/home/webapps/asp_fr/data/asp/publications/roca-general/export-(export)/faucets-technical-manual-2016, 50/60Hz Sensor Type Sensitive distance Adjustable 30-70cm(Use white coard) Flushing mode Intensive and water saving Control water supply and stop water supply within 5 minute manually. Flushing procedure consecutive 2 minutes. Self-cleaning Self-cleaning will be implemented once while this product is not used during 24 hours. Main Flush volume 3.5L (+/-0.5) (Dynamic pressure is 0.2 Mpa(2 bar)) Working temperature 1/home/webapps/asp_fr/data/asp/publications/roca-general/export-(export)/faucets-technical-manual-201655°C Water inlet connection G ½” Working pressure 0.05/home/webapps/asp_fr/data/asp/publications/roca-general/export-(export)/faucets-technical-manual-20160.7Mpa(0.5/home/webapps/asp_fr/data/asp/publications/roca-general/export-(export)/faucets-technical-manual-20167bar) Product size 120×120×92mm Product weight 2kg(±0.5kg) Troubleshooting Symptom Probable Cause Action 1. No batteries or wrongly installed (A5A9702...) 1. Check the batteries No response 2. A/C power source outage or power cut (A5A9802.. .)2. Check the power source (The indicator not on) 3. There are sundries in front of a sensor. The 3. Check the sundries sensor window is dirty. 4. Check the sensor window 4. The wire connection is not good or wrongly 5. Check the wire connector connected. There is response 1. 1. Wait for 60 seconds 2. The inlet valve is not fully opened. 2. Fully open the inlet valve result 1. The inlet valve is not opened. 1. Fully open the inlet valve. Not enough water 2. 2. 3. The water pressure is too low. 3. Contact the water supplier is always on. The batteries are run out (A5A9702... ) Change the batteries Other Please contact with dealer or call at 902400423(Only in Spain)