814 | C6 Electronic flush valves · Installation Sentronic-R Installation, use and maintenance 5Installation procedure Fixing bracket Attach the bracket to the valve box using the supplied bolts. Make sure the bracket is placed in a flat position and in the correct direction. The main slot should be upwards . Connect cable/battery Connect the sensor cable of the valve box panel and the power supply (batteries or transformer) Attention • Make sure that the direction of the panel is correct with the Roca logo on the front side. • Do not force the connections of the different cables. Transformer Battery assembly A5A9802... A5A9702... Install panel unit 1.) Fix panel into the wall (①), fastening it down along the wall tightly ( ② ). Ensure that panel and fixing braket are completely combined. 2.) Use a hex wrench to screw clockwise ( ③/home/webapps/asp_fr/data/asp/publications/roca-general/export-(export)/faucets-technical-manual-2016④ ) till it is completely fixed. To disassemble the panel, you may operate this operation counterclockwise. Attention: Protect the product while installing the panel to avoid scratches on the surface of product. to prevent any damage to the mechanism.