574 | C1 Faucet collections ยท Installation Loft-E Installation, use and maintenance 2.2. DETECTION DISTANCE ADJUSTMENT The faucet is preadjusted from factory (8 cm)*. The detection distance can be adjusted depending on the requirements of installation. 1 6s. 2 Before 6s. and maintain 3 6s. * Distances set with a Kodak D gray scale card. (Distances set with hand may vary). 4 Min: 7 cm* D Max: 13 cm* 1 Unplug and re-plug power supply. The red LED will start to blink. 2 Within 6 seconds since power supply plug (while red LED blinks) place the hands closer than 2 cm. in front of LED and keep them in place. 3 6 seconds after power supply plug, the red LED stops blinking and remains on. 4 Move hands to the desired distance of detection within 6 seconds or until the red LED turns off. The tap is then adjusted to the desired detection distance. WARNIN G: depending on the placement of the faucet, it is possible to experience involuntary detections. If that should happen, reduce the detection distance. < 2 cm