826 | C6 Electronic flush valves · Installation Euret-E Installation, use and maintenance 1List of components of Urinal Sensor Flusher Front panel assembly Flusher valve box Battery assembly Installation manual Only A35945E..0 , A35945S..0 Transformer Cable connection box Magnet Screw x2 Only A35945M..0 , A35945T..0 Only A35945M..0 , A35945T..0 Attention 1. Please keep the sensor window away from strong UV light and electromagnetic fields. 2. Please do not hit the case and sensor window to avoid damaging the device. 3. The sensitive distance around the front part of the product should not be less than 70 cm. A direct light on the sensor or dark colours may vary te detection distance. h 4. Avoid the use o f reflecting objects near the sensitive area of the product (e.g. stainless steel objects). 5. Before connecting this product to the water supp ly, please make sure that the water is clean and in good condition so as to avoid the blockage of the product. 2Specifications Model A35945E..0 , A35945S..0 A35945M..0 , A35945T..0 Power 4 x LR6/ 1.5V/AA alkaline batteries AC100-240V/home/webapps/asp_fr/data/asp/publications/roca-general/export-(export)/faucets-technical-manual-2016, 60/50Hz Sensor Method Reflective infrared sensor specification Sensitive distance Detection distance should be automatically adjusted within 30-70cm * Flushing mode Intensive or water saving Manual flush Manual flush control for 5 minutes. Flushing Deodorizer flush It is activated if 3 users are detected in 2 minutes. procedure Self-cleaning It is activated if the product is not used in 24 hours. Main Flush volume 3.5 L (+/- 0.5) (Dynamic pressure is 0.2 MPa (2 bar)) Working temperature 1-55°C Water inlet connection G1/2” Working water pressure 0.05 - 0.7 MPa (0.5 - 7 bar) Note: *Sensor will adjust the sensitive distance automatically based on the surrounding environment.