804 | C6 Electronic flush valves · Installation Sentronic-S Installation, use and maintenance 5Installation Fixing bracket Attach the bracket to the valve box using the supplied bolts. Make sure the bracket is placed in a flat position and in the correct direction. The ma in slo t should b e upwards. Connect cable/battery Connect the sens or cable of the valve box panel and the power supply (batteries or transformer) Attention: • Make sure that the direction of the panel is correct with the Roca logo on the front side. • Do not force the connections of the different cables. Transformer Battery assembly A5A9602C00 / A5A9602CM0 A5A9502C00 / A5A9502CM0 Install panel unit 1.) Fix panel into the wall ( ① ), fastening it down along the wall tightly ( ② ). Ensure that panel and fixing bracket are completely combined. 2.) Use a hex wrench to screw clockwise ( ③ /home/webapps/asp_fr/data/asp/publications/roca-general/export-(export)/faucets-technical-manual-2016 ④ ) till it is completely fixed. To disassemble the panel, you may operate this operation counterclockwise. Attention: Protect the product while installing the panel to avoid scratches on the surface of product. While using a wrench for fixing, please do not use it forcibly to prevent any possible damage to the mechanism.